| IOC-MIPS_030a | 10210C | |||||||
| Title: | Heaters, Temperature Sensors | |||||||
| Objective: | To confirm that the detector temperature profile after an anneal is as expected. | |||||||
| Also, this verifies that the heaters and temperature sensors are working. | ||||||||
| Description: | This is a short test to determine that the detector response to heating is the | |||||||
| same as during ground tests and that there is no more than the expected interaction between the detectors. | ||||||||
| Place in Schedule: | The telescope does not have to be cold for this test, so it can be done during the | |||||||
| initial electronic check-out of the instrument. | ||||||||
| Required Conditions: | PCS pointing and stability are not at all critical | |||||||
| Resources: | ||||||||
| duration (best estimate) | 5 minutes | |||||||
| real time downlink (Y / N) | n | |||||||
| special post event actions (Y / N) | data must be analyzed | |||||||
| Outcome: | ||||||||
| description | generates temperature telemetry | |||||||
| can proceed in parallel with other activity | yes | |||||||
| must outcome be confirmed before next event / test /activity | no | |||||||
| method of confirmation (sensor TLM, data analysis, etc.) | analysis | |||||||
| estimate of data turn around if required for confirmation | ||||||||
| number of DCEs | 0 | |||||||
| Unique or included in planned uplink or downlink/analysis tool | can use anneal IET | |||||||
| Contingency Plan: | ||||||||
| "What if..." | ||||||||
| IOC Critical | Y | |||||||
| References: | ||||||||
| Template last updated: | 11-Sep-95 | |||||||
| C.W. Engelbracht | ||||||||