CAID: MIPS-234 | Title: 160 um Focal Plane Survey (Coarse) #1 | |
System: MIPS | Principal: jkeene | Deputy: |
Objective: | To measure the location of the 160um array relative to the PCRS. |
Description: | Put the CSMM in its nominal SED position to direct the light from a bright 160um source onto the 160 um array. Step the image across across the array by moving the S/C in 1/2 pixel steps (7.5") for a total of 3' (24 steps and 25 integrations). Use the CSSM to chop 2' off source (more if possible). Integrate 3 sec each on and off source at each position. Repeat at 5 positions along the array. Insert each scan above within standard FPS "PCRS sandwich" measurements. |
Day: 51.007638888892 | Suggested Order: J400 | ||
Must be preceded by these activities (list by CAID): MIPS-324 | |||
Place in Schedule: The pointing and tracking must be performing optimally . This task should be performed at least 6 hours after the turn on of MIPS. | |||
Priority: Critical | |||
Conditions | |||
Maximum telescope temperature: | 6.5 K | ||
Minimum telescope temperature: | 5.5 K | ||
Should activity be repeated if focus changes? | No Repeat if focus changes by 0 mm | ||
Maximum absolute pointing uncertainty: | 3 arcsec (1 sigma radial) | ||
Maximum precision offset uncertainty: | 0.4 arcsec (1 sigma radial) | ||
Observatory configuration: | standard | ||
Go/No Go criteria: | CSMM, CE, and detectors must be operational, instrument and telescope temperatures must be stable | ||
Duration: 152 minutes
| Real time downlink:
 
No | |
Data Volume (uncompressed): 0 Mbits | |||
List Blocks, AORs, SERs, IERs, or unique sequences required (uplink): IER to expand normal FOV of 160um photometry AOT | |||
List Analysis tools required (downlink): Pipeline BDC, special mosaic. | |||
Estimate of data turn around: 60 hours | |||
Description: Centroid of source in pixel coords determined, related to CSMM offset. | |||
Can proceed in parallel with other activity: No | |||
Must outcome be confirmed before next activity: No | |||
Method of Confirmation: Data Analysis CSMM TLM | |||
Success criteria: Source appears in the image. | |||
Contingency plan: Correct pointing problem, repeat activity. | |||
Comments | |||
References: | |||
Additional Comments:
This task should be repeated with a different IR source. | |||
This activity last updated: 7/25/2002 1:53:42 PM |