Sequencer Site SIRTF IOC Activity c. 2002

CAID: MIPS-328 Title: Scan AOT Validation - slow speed
 
System: MIPS Principal: dlp Deputy: alberto
Objective:   
This needs to be filled out with part of MIPS-327
 
Description: 
Execute MIPS Scan AOTs for all available
selectable parameters, or a sensible range. Not
all scan lengths need be tested -- do minimum,
maximum, and several intermediate. Can be 
the test same as: Select final operational
parameters

Tune IPP file as needed 
Several AORs will be constructed using each scan
rate that will have :           
1) one forward and reverse minimum length scan
legs for each of four available offsets (all 
scan rates)     
2) one forward and reverse maximum length scan
legs for mimimum and maximum offsets 
(fast rate only)        
3) one X six forward and reverse medium length
scan legs at two of four available offsets (fast
rate only)      
4) do one instance of 1 for 3 cycles (slow rate
only)
 
Day:   68.6548611111139 Suggested Order:   Q300
 
Must be preceded by these activities (list by CAID):  
 
Place in Schedule:  
 
Priority:   Necessary

Conditions

Maximum telescope temperature: 300 K
 
Minimum telescope temperature: 5.5 K
 
Should activity be repeated if focus changes?   No     Repeat if focus changes by 0 mm
 
Maximum absolute pointing uncertainty: 0 arcsec (1 sigma radial)
 
Maximum precision offset uncertainty: 0 arcsec  (1 sigma radial)
 
Observatory configuration:
 
Go/No Go criteria:

Resources

Duration:   450 minutes
 
Real time downlink:   No   

Data Volume (uncompressed): 300 Mbits
 
List Blocks, AORs, SERs, IERs, or unique sequences required (uplink):
 
List Analysis tools required (downlink):  

Outcome

Estimate of data turn around:   24 hours
 
Description:
 
Can proceed in parallel with other activity: No
 
Must outcome be confirmed before next activity: No
 
Method of Confirmation:  
 
 
Success criteria:
 
Contingency plan: 
 
 

Comments

 
References:  
 
Additional Comments:
 
This activity last updated: 4/19/2002 10:50:01 AM