There is a problem w/ your write-up. Check that you have valied entries for \$CAID and \$Campn in your analysis.php file. If that checks out, then Contact Stansberry"; return ; } // get first matching task $row = mysql_fetch_array($result); $title = $row["title"]; $princ = $row["principal"]; $deputy= $row["deputy"]; $campn0 = $row["campn0"]; $aorkeys = $row["aorkeys"]; // get real name of principal, deputies $princ = ioc_get_person($princ); $princ = $princ[0]; $deps = explode(",",$deputy); foreach ($deps as $depty) { $depty = trim($depty); $depty = ioc_get_person($depty); $depty = $depty[0]; $depty = explode(",",$depty); $depty = $depty[0]; // last names only $deplist[] = $depty; } $deplist = implode(", ", $deplist); $caid = sprintf("%03d",$caid); $file = "mips-".$caid.$campn.".analysis.php"; // if more matches, append the AORKEYS from those $numrows = mysql_num_rows($result); if ($numrows > 1) { $aorkeys = " " . $numrows . " Task Executions:  ". $aorkeys; for ($i=0;$i < mysql_num_rows($result); $i++) { $row = mysql_fetch_array($result); $morekeys = $row["aorkeys"]; $aorkeys = $aorkeys .';  '.$morekeys; } } // END PHP. ?> <? echo "MIPS-$caid, Campaign $campn IOC/SV Analysis"; ?>

Principal:
Deputy:
Analyst:
AORKEYS:
Last Updated:


Task Outcome Summary


Abstract

This task takes IOC routine 24um PHOTOMETRY mode flatfields (and is repeated a number of times in different IOC campaigns) to be used on a regular basis. This activity is a companion to the 24 um routine SCAN flatfield task (MIPS-914). The pair of activities will allow us to determine the relative efficiency and quality of flatfields created using scan and photometry AORs. Since this task is repeated a number of times during IOC, we will observe different regions of the sky each time. The task will check for possible variations of quality of flatfield or saturation. This task will also be useful for screening regions of the sky to obtain flatfields in SIRTF routine operations. This task together with MIPS-914 will determine whether routine flatfields will be obtained in photometry or scan mode.

Analysis

We obtained a 4 point dither map (1 cycle) at 24microns with 3 second DCEs in ONE REGION of the sky chosen to avoid bright point sources. The offsets between positions are 400 arcseconds. At each position of the dither pattern there will be 16 images, so a total of 64 images were obtained for each of the regions.


We used mips_sloper turning off the row droop correction, with the Campaign F Dark Image, then mips_caler with the 24micron latent correction and flat-field calibration turned off, and finally mips_enhancer using the same parameter file as in Campaing D1, except that we normalized the input images before doing the median combine. We basically used a 3sigma rejection and MEDIAN combining a total of 64DCEs for each of the FOUR regions of the sky, and a flatfield combining all 256DCEs.


We combined these DCEs with the 256 DCEs from data taken in Campaign F. The resulting dataset contains some 320 DCEs from FIVE separate sky regions, allowing for a combined Campaign F and G Superflat.

Results


The 24micron Flatfield observed in Campaigns F and G by combining the 320DCEs obtained observing five regions of the sky is shown in Figure1. Figure2 shows histograms of the DN/s of the normalized flatfields for the combined 320DCEs. Statistics on the image provides the following:


Figure1.24Micron flat created with mips_enhancer displayed from z1=0.8 to z2=1.2. For this flatfield we combined the observations of the five fields from Campaign F and G for a total of 320DCEs.

24micron Flatfield - COMBINED: Number DCEs= 320; mean= 0.9943; median= 1.0000; mode=1.0111; sdtdev= 0.0514; skew= -0.3645;


Figure2.Histogram of super flatfield produced from all campaign F and G DCEs for task MIPS-917.

Another way to assess the quality of the observed flatfield is to do differential photometry of stars observed on different positions on the array. We used 24micron Photometric Standard Data (MIPS-920) observations of the star HD159330. In this AOR, the position of the calibration star shifts around the array, as illustrated in Figure3. We have executed mips_caler on the AOR for MIPS-920 for campaign G (AORKEY 6945792) using the Campaign F+G superflat. We used IRAF to perform photometry on all the individual DCEs observed as part of MIPS-920. The photometry was obtained through a number an apertures with radii of 6 pixel (past the first Airy disk). The background was measured from an annulus with a radius of 10 pixels and a width of 3pixels. The results of the photometry are presented in Figure4. The mean and standard deviation of the counts in this aperture for this star at 24um are: mean= 68575.7 DN/s; STDDEV= 1024.6. Therefore, the photometry varies by 1.5 percent over the array with this flatfield.


Figure3.The standard star HD159330 at different positions on the the MIPS 24um array. The data has been processed with mips_sloper and mips_caler using the campaign F and G super-flatfield.


Figure4.Photometry of the standard HD159330 at different positions on the 24um array sorted by DCE number in AORKEY 6945792. The red solid line indicates the mean flux (in log DN/s) and the dashed lines show the 1 sigma standard deviation.


To check photometric accuracy as a function of array position, Figures5 and 6 plot the measured photometry as a function of the x- and y-pixel coordinate of the centroid of the standard star. While these seems to be little variation in photometry with x-pixel coordinate, there is a slight gradient in the photometry with y-pixel coordinate. The change is roughly delta[ log(DN/s) ] / delta(y) = -0.00024, which mutliplied by 128 pixels corresponds to a change of 0.03 dex in DN/s over the whole array. Interestingly, the y-direction corresponds to the direction of scan mirror position changes. Figure7 shows the photometry as a function of scan mirror position (as recorded in the CSM_PRED header keyword for each DCE). The gradient in photometry appears to have a linear relation with scan mirror position, where delta( log[DN/s] ) / delta(y) = 5.1e-5. Future tests of the photometric accuracy using individual flat-fields for each scan-mirror position are planned, and will be reported in IOC meta-task 2010 (tracking Flat measurements).


Figure5. and Figure6.Photometry of the standard HD159330 as a funciton of x- and y-centroid pixel position on the 24um array in AORKEY 6945792. The red solid line indicates the mean flux (in log DN/s) and the dashed lines show the 1 sigma standard deviation in both figures. In Figure6., the solid blue line shows the linear-regression fit to the data points with fit in the plot inset.



Figure7.Photometry of the standard HD159330 as a function of scan-mirror position (from the CSM_PRED header keyword value) on the 24um array in AORKEY 6945792. The red solid line indicates the mean flux (in log DN/s) and the dashed lines show the 1 sigma standard deviation in both figures. The solid blue line shows the linear-regression fit to the data points with fit in the plot inset.


Conclusions

We have constructed 24micron Flatfields obtained in PHOTOMETRY mode. In campaing F we obseved four different regions of the sky and constructed a flatfield using all 256 DCEs. The standard deviation of the 24micron Flatfield over the entire array is approximately 5%, but this statistics includes the illumination pattern of the 24micron array (see Analysis writeup of Flat Fields mips-917 for Campaign D2). Comparing photometry of the standard star HD159330 at various positions across the array, we find that the photometry varies by 1.5 percent. This is consistent with the analysis of mips 917 in Campaign D2). The variation in photometry appears to correspond along y-pixel coordinate values, and corresponds to changes in the scan-mirror position. Future tests are planned to track the photometric accuracy with scan-mirror-dependent flat fields.

Output and Deliverable Products

24micron Flatfield to be used to reduce data obtained in campaigns F and G.

Actions Following Analysis