| CAID: MIPS-920 | Title: Routine 24 um Flux Standard | |
| System: MIPS | Principal: dhines | Deputy: |
| Objective: | Flux Calibration to be done at the beginning and end of every campaign after instrument checkout and calibration has reached a certain level. |
| Description: | Similar to MIPS 350. 1 flux standards will be observed in (small field) photometry mode. In addition, a short observation of the 24um stimulator (5 DCEs before and after one of the 24um standards) will be made to calibrate that stimulator and check for STIM stability. The standards are listed in the MIPS SDD. 10 sec DCE and 2 cycles = 564s Stims = 60sec Total = 11 minutes Nominally a standard AOR, but may need stim flash. Depends ion results from MIPS 120. |
| Day: 45.7055555555562 | Suggested Order: | ||
| Must be preceded by these activities (list by CAID): | |||
| Place in Schedule: | |||
| Priority: Critical | |||
Conditions | |||
| Maximum telescope temperature: | 33 K | ||
| Minimum telescope temperature: | 5.5 K | ||
| Should activity be repeated if focus changes? | No Repeat if focus changes by 0 mm | ||
| Maximum absolute pointing uncertainty: | 5 arcsec (1 sigma radial) | ||
| Maximum precision offset uncertainty: | 1 arcsec (1 sigma radial) | ||
| Observatory configuration: | |||
| Go/No Go criteria: | |||
Duration: 11 minutes
| | Real time downlink:
No | | |||
| Data Volume (uncompressed): 5 Mbits | |||
| List Blocks, AORs, SERs, IERs, or unique sequences required (uplink): Nominally a standard AOR, but may need stim flash. Depends ion results from MIPS 120. | |||
| List Analysis tools required (downlink): IDP3 | |||
| Estimate of data turn around: 24 hours | |||
| Description: | |||
| Can proceed in parallel with other activity: No | |||
| Must outcome be confirmed before next activity: No | |||
| Method of Confirmation: | |||
| Success criteria: | |||
| Contingency plan: | |||
Comments | |||
| References: | |||
|
Additional Comments:
| |||
| This activity last updated: 4/26/2002 10:04:55 AM | |||