CAID: MIPS-922 | Title: Routine 70 um Flux Standard | |
System: MIPS | Principal: dhines | Deputy: cengelbracht, dfrayer, SStolovy |
Objective: | Flux Calibration to be done at the beginning and end of every campaign after instrument checkout and calibration has reached a certain level. |
Description: | Same procedure as MIPS 920, but only for 70 um with a bright enough star for 25:1 on photosphere. 70 um flux standard - 12 min Total - 12 min Ph/SR AOT used for all observations. |
Day: 68.2020833333372 | Suggested Order: | ||
Must be preceded by these activities (list by CAID): | |||
Place in Schedule: | |||
Priority: Necessary | |||
Conditions | |||
Maximum telescope temperature: | 12 K | ||
Minimum telescope temperature: | 5.5 K | ||
Should activity be repeated if focus changes? | No Repeat if focus changes by 0 mm | ||
Maximum absolute pointing uncertainty: | 5 arcsec (1 sigma radial) | ||
Maximum precision offset uncertainty: | 0.4 arcsec (1 sigma radial) | ||
Observatory configuration: | |||
Go/No Go criteria: | |||
Duration: 12 minutes
| Real time downlink:
 
No | |
Data Volume (uncompressed): 5 Mbits | |||
List Blocks, AORs, SERs, IERs, or unique sequences required (uplink): | |||
List Analysis tools required (downlink): | |||
Estimate of data turn around: 48 hours | |||
Description: | |||
Can proceed in parallel with other activity: No | |||
Must outcome be confirmed before next activity: No | |||
Method of Confirmation: | |||
Success criteria: | |||
Contingency plan: | |||
Comments | |||
References: | |||
Additional Comments:
| |||
This activity last updated: 4/26/2002 10:07:14 AM |