70µm NF Frame table update sanity check

Principal: Jocelyn Keene
Deputy: Jane Morrison, Bill Wheaton
Data Monkey(s):
Priority: Necessary
Downlink Priority: Normal
Analysis Time: 1 day
Last Updated:

Objective

This task will execute one PCRS peakup IER from the IRS PCRS peakup AOT and one short 70 µm NF Compact Source photometry AOT, purely to check if the frame table updates have been made correctly and with the correct sign.

Description


One PCRS peakup IER from the IRS peakup AOT: 5 minutes.
70 µm NF default Photometry AOT for a compact source (3 sec, 1 cycle) 5 minutes.
This task is performed in campaign Q to check the results from MIPS_137 task (70 µm NF FPS) done in campaigns I and J whose results went into FTU 12. The frame table updates for all the campaigns can be found in the following table: Frame Table Updates.

Data Collected

One 70 micron photometry AOT.

Data Reformatting Requirements

Array Data Desired:

70 µm

Data Reformatting Option:

b

Task Dependencies

Calibration Dependencies

Output and Deliverable Products

  • Calibrated data- output from MIPS DAT - sent to centroider
  • Centroided data
  • Comparison of Centroided data and information from AOT - to determine if targets fell on array at predicted locations.

    Data Analysis

  • JPL MIPL transfers downlink data to SSC.
  • SSC downlink ops processes and places results in sandbox.
  • SSC MIPS IST uses FTZ to transfer data from sandbox to SSCIST21, and repackages to run with the Arizona data analysis tool (DAT). Data are FTP'd to UA.
  • The data are calibrated using the MIPS DAT.
      1. Run mips_sloper : with following options:
        • mips_sloper filename
        • IF we do not use the default directory for the calibration files. Then use the -j option.
        • -j dirname : directory below $MIPS_DIR/Cal to find calibration files.
      2. Run mips_caler : with following options:
        • mips_caler -I illumination_correction_filename -D dark_filename-C pathname
        • -C path is the path to where the calibration files live. If you do not use the -C then the default will be used.
        • -D dark filename.
        • -I illumnation correction filename
      3. Run Xsloper_view and check to make sure data seems reasonable:
    1. The calibrated data file mipsfps_YYY118.fits (YYY a 3-digit integer string, identifying the run number) is a FITS multi-extension image file, one extension per DCE.
  • The calibrated data file is placed on sscist21: /mipsdata/fps/inpdat. File is linked to processing subdirectory (currently /home/sscmip/users/waw/fps).
  • The MIPS IDL Centroid File Generation tool, mipspos.pro, is run according to detailed instructions in sscist21: /home/sscmip/users/waw/fps/fps.doc.
  • The output centroid values are compared with input list generated from the values defined in the AOR.

    Software Requirements

    Actions Following Analysis

    Failure Modes and Responses

    Additional Notes